Picking out the back, side, and neck woods and laying out the body design
Designing the custom rosette
Joining the back
Preparing the neck blank and gluing the scarf joint and stacked heel
Bracing the back and soundboard
Sanding, preparing, and bending the sides
Installing the kerfing and radiusing the sides
Fitting the back and soundboard to the sides and installing the pick-up
Gluing on the soundboard and setting the proper neck angle
Mother of pearl headstock inlays and more neck work
Fingerboard binding and inlays
Back attached and binding work
Neck shaping and fingerboard installation
Final sanding and tape up for finish
Setup
Finished product
